Download non gaming edition driver

The audio format is "passed through" to the recording. In other words, if your source includes AC-3 audio, this audio will be used in your recording. The default formats you can record in are:. M2TS and. You may then record to any of the hard disk drives installed or connected to the PC, including external drives. It is not recommended to use a different USB cable other than the cable provided with the device. Make sure you're gaming system is not set to p.

Please set the output resolution to i or p. Please see the appropriate setup instructions for your game console:. If you are editing the file using the Total Media Extreme applications built in editor, this allows you to create a project file that can be burned to a blu ray compatible DVD. Once on DVD, you would then need to rip the DVD back to hard disk and use a third party editor to convert it to the proper format for sites such as YouTube.

If you are a developer, you can bring H. Sony Vegas does not detect non-AC-3 audio in. TS or. M2TS files. When recording videos in the Arcsoft Capture module, make sure AC-3 is selected under Format settings.

Share you best games with your friends in HD! Video passthrough, for zero delay recording and gaming! Create your own HD video library Plus includes our "no delay pass through" for flawless game play recording! Built-in hardware H. Optical or stereo audio inputs. TS, which is a generic 'transport stream' compatible with many digital media players. M2TS, which is compatible with the Sony Playstation3.

MP4, which is compatible with the XBox The. For example, i input records at i, P records at P, etc. Any other format conversions needs to be done with the MediaConvert program supplied. There are three formats which you can choose when recording a video:. TS which is a generic 'transport stream' compatible with many digital media players. M2TS which is compatible with the Sony Playstation3. DTS audio is currently not supported. This error can happen in Vista operating systems.

Please download the latest version of the Blaster Configuration program click here. DTS audio is not supported at this time. Here is a link to the Graphedit graph. By connecting the Component video output from your high definition cable TV or satellite TV set top box to the Component video inputs of the HD PVR 2, you will be able to record the TV programs coming from your set top box to the hard disk. The video quality of MP4 and TS files are the same.

All record file types can be used to burn AVCHD Blu-ray compatible discs but you will need to supply your own disc burning application. When bringing audio in through the stereo jacks, audio is recorded as MPEG 1 layer 2 audio. No, the HD PVR 2 itself does not have the ability to play back recorded videos to an external monitor.

To playback recorded videos, you will need to connect your laptop or PC to your TV set. And the Hauppauge Capture Edit tab allows you to trim your videos very quickly without the need to re-encode. YouTube will not record your video streams unless you set a start time and an end time in your streams. If you simply start and stop a YouTube stream, YouTube will not record it.

Yes for recording, no for streaming. With the latest version of Hauppauge Capture , you can record your videos with a webcam in your recordings. This is called the 'Facecam' feature in Hauppauge Capture. Facecam allows you to specify the location and size of video from your webcam in your recordings. To fix, you need to reset the video settings on your PS3. You should see the light go Red. This means your PS3 is turned off.

Your PS3 should now be set to Component video out and you should see video in the preview window in Hauppauge Capture. Most of the time this is caused by either one of the Component video connectors is not connected. For example, if the Red connector is not connected correctly, your video picture will look green. Also try updating to the latest drivers supplied by your graphics card manufacturer. If you are running an AMD graphics card in the PC which the HD PVR 2 is connected to, you may experience a slight change in brightness every few seconds while in the preview or edit screens.

This is due to an issue with hardware acceleration that we have seen in some AMD drivers. This shift does not affect recordings and typically can be eliminated by either changing drivers for the graphics card or by disabling Hardware acceleration. This is caused by either a slow processor in your laptop or desktop PC, or the display adapter is having a problem.

Make sure your video card meets the minimum requirements. Also try updating to the latest drivers supplied by the manufacturer. In September , there was a problem with the ATI graphics driver which would cause jerky video or freezing of the video screen. This should be fixed with an update from ATI on their graphics drivers.

Check to see how you have your Television connected to your set top box. In order for the audio pass through to operate, you need to configure the Audio settings in the Hauppauge Capture application. Click on the Capture tab. Increasing the recording bitrate will eliminate motion artifacts in your recordings. In Haupauge Capture, in the Capture tab make sure Variable is selected. This should give you very good quality.

You can experiment with other settings, but in our experience, these are good for uploading to YouTube.

This usually takes just a few seconds and does not change the video quality of your recording. Approximately 6 GB per hour at Check for the presence of "Constant Guard" from Exfinity. If present, uninstall it, then re-run the installation for Hauppauge Capture. Once installed you can reinstall Constant Guard. The Hauppauge game recorder will then pick up the party chat when recording game audio.

In order to record your voice which won't come through the speakers and be picked up , you need to have a Mic plugged in to your PC and place near your face as you do. Then make sure in Hauppauge Capture you select the mic in the drop down menu and set level.

Then you will get the game chat and the game audio recorded, and you speak to your party via Kinect microphone. Basically, one mic to chat with your party and one mic to record your game commentary.

Sometimes Device Central will close. To adjust the color settings, open Hauppauge Capture and go to the Capture tab.

Then click the Advanced button at the bottom and go to Video Proc Amp. Here you will see the color and briteness settings. If you are using Windows 10, make sure you have downloaded and installed the latest version of Hauppauge Capture.

A recent Windows 10 update changed Privacy settings and requires the latest Hauppauge Capture to fix this message. If you are using Hauppauge Capture, this error is normally caused if you did not fully install Hauppauge Capture or something such as anti-virus software prevented Hauppauge Capture from installing. Please go to the Hauppauge Capture download page and follow the installation instructions once more.

First, make sure, in the Capture tab: Source: make sure your Hauppauge device is selected. This could be a broken or loose video cable or you plugged the cables into the wrong connector on HD PVR 2. Is there something I am not doing correctly?

To check this, right click the speaker icon in the device tray and select 'Playback Devices' or 'Open Sound Settings'. Click on 'Set Default'. In order for you to see your game video on your TV set:. This can potentially cause problems such as "no device detected" or a black screen in Showbiz Capture or bad video recordings.

Pass through problems, such as a black screen on your TV set even though you can record videos , are usually basic cabling and settings in Showbiz.

Check your cables! If all input and pass through connections are correct and pass through is still not working, check your HD TV for correct input source. If you have stutter in your preview window, check that system specs meet the minimum required. This is not a fatal problem since the HD PVR 2 will make good recordings even if the preview window slows down.

Preview good but stutters in playback on your PC screen: this normally means your PC or graphics card is too slow. Check the video card specs. The Hauppauge YouTube channel. You will be given an option to Run or Save the file. Click Save to save the file in your Download folder.

Run this file. It will install the Windows driver When finished running the update, you will be ask to restart your PC. Restart your PC. Double click on the Hauppauge Capture icon. If your cables are connected, you should now be able to see your game console on your TV set and record and stream your gameplay. StreamEez: live stream your game play, with hardware acceleration The StreamEez application is used to stream your video gameplay to Twitch and YouTube click to enlarge.

To install this version of StreamEez: Click on the download link. It will install the StreamEez-Pro application plus the Windows driver.

When finished running the update, you will be ask to restart your PC. Restart your PC While the PC is restarting, power cycle your StreamEez device to load the new firmware remove power from the unit for a few seconds and then plug it back in. Under Source upper left hand corner , make sure it is set to your Hauppauge device. If your cables are connected, you should now be able to stream with Twitch or YouTube. How to turn off HDCP on your PS4 Are you unable to record video, getting no video but you might get choppy audio in your recordings or a black screen in Hauppauge Capture?

It will be enabled by default, so simply click on it to disable the HDCP copy protection. You should be able to see your game on your computer screen and TV monitor. Xbox video setup Setting the Video output on the Xbox, step by step instructions First, turn on your Xbox and navigate to the main menu.

Navigate to the last menu on the right and go into System Settings. Go into Console Settings Go into Display. Now select the resolution you want. Video setup guide to YouTube Live Click to play video.

Go to the Xbox Guide Menu 2. Go along to settings. Select Voice. Go down to voice output and select 'Play though both'. This will make the audio play out your TV and through your mic at the same time. It will be enabled by default, so simply click on it to disable the irritating feature. The following is from the Xbox support site Problem: Playing premium content on your console establishes an HDCP connection with your television. To resolve this problem, try the following solutions: Restart your Xbox One console: Press the Xbox button on the console for ten seconds until the console turns off.

Touch the Xbox button on the console again to turn it on. Try to play the content again. If your Xbox One console is in instant-on power mode: Go to the Home screen. Press the Menu button on your controller and select Settings. Select Power mode and then select Save Energy. Turn off the console by holding the Xbox button.

Turn on the console by pressing the Xbox button, and then try to play the content again. To fix this in Windows: Right click the speaker icon in the device tray and select Open Sound settings. Here's how to do this: On your PC, go to the speaker icon on the right side of your desktop's toolbar, right-click the speaker icon and select "Recording devices". Then in the new window that opens, locate your microphone and the right-click it in the list and select the option "Properties".

A new window called "Microphone Properties" will open. Go to the "Advanced" tab. There you'll see a section named "Default Format", click the drop down menu and select this from the list: 2 channel, 16 bit, Hz DVD Quality. Then click apply, restart your PC and give the recording another try. Recordings from composite or S-Video are still made in the H. Windows 10, 8, 7, Vista and Windows XP with service pack 3. Here is what we recommend for video playback minimum : Dual core CPU 2.

DTS audio is currently not supported. Video record resolutions are p30, p60, p60, p60 and a number of downscale variants of these formats. You can record at datarates from 1Mbs to If you choose Variable, the maximum recording datarate is about 1. HD PVR 2 can adjust the color settings of both the recordings and the passthrough video. Check the USB cable! If the Yellow light blinks once and then turns to Blue, it means that Hauppauge Capture cannot detect a video signal.

There are several reasons this can happen: You did not plug in a video cable, or you have the wrong video source selected in Hauppauge Capture. And check your video cable and your cable connections! If you have a bad cable or have made a mistake plugging in the cables, you will see a Blue light. If you are recording from an Xbox , make sure your video mode is set to either p or p. Here is where you can find instructions on setting your video mode.

If you are recording from a PC game system, make sure you have set your PC graphics video mode to p at 60Hz. Here is where you can find instructions on setting your PC video mode. There are a number of reasons this could happen.

If you continue to see the Red light while recording, check your cabling and if you continue to have problems, contact Hauppauge technical support. Black screen in the Capture preview window and no video on your TV set: First, make sure, in the Capture tab: if you are using an Xbox, make sure your Xbox is set to p or p.